Thermoguard category

fire

  • Asbestos Encapsulating Smoke Flame Retardant

    Asbestos Encapsulating Smoke Flame Retardant

    Helps seal and encapsulate rigid asbestos surfaces to reduce fibre release. Smoke and flame retardant coating with Class 0 and EN Class…
  • Overcoat
    Fire Retardant Varnish Overcoat (Interior)

    Fire Retardant Varnish Overcoat (Interior)

    Decorative fire retardant varnish finish for interior timber and wood surfaces. Designed to work with Thermoguard Fire Varnish Basecoat as a complete…
  • Timber Basecoat
    Fire Varnish Basecoat

    Fire Varnish Basecoat

    Clear intumescent fire varnish basecoat for timber and wood-derived surfaces. Forms the primary fire protection layer within the Thermoguard Fire Varnish System.…
  • Basecoat
    Safewalls Insulating Basecoat

    Safewalls Insulating Basecoat

    Intumescent insulating basecoat for walls and ceilings with existing paint layers or wallpaper. Designed to upgrade surfaces to EN Class B s1…
  • Thermoguard-Safewalls-Onecoat-SW

    Safewalls OneCoat Anti-Viral Smoke & Flame Retardant

    Anti-viral smoke & flame retardant coating for walls and ceilings. Designed to work with Safewalls Insulating Basecoat as a complete fire protection…
  • Timber
    Smoke & Flame Retardant SFR Dualcoat

    Smoke & Flame Retardant SFR Dualcoat

    Advanced smoke & flame retardant topcoat for timber and wood-based surfaces. Designed for use with Thermoguard Timbercoat systems internally and externally. Helps…
  • System product
    Thermocoat S

    Thermocoat S

    Up to 90 minutes fire protection for structural steel and cast iron. Designed to help protect load-bearing steel during a fire. Suitable…
    System note: Use with Flame Retardant Topcoat for the approved external steel system.
  • System product
    Thermocoat WI

    Thermocoat WI

    Interior fire protection for structural steel and cast iron. Can provide up to 90 minutes fire resistance when specified correctly. Water-based and…
    System note: Check the relevant steel specification. Flame Retardant Topcoat may also be required depending on the final system.
  • Thermocoat WO

    Thermocoat WO

    Designed specifically for hollow section steelwork including CHS, SHS and RHS steel. Can provide up to 90 minutes fire resistance when correctly…
  • Thermoguard Intumescent Mastic

    Thermoguard Intumescent Mastic

    Fire-rated intumescent acrylic mastic for joints, gaps and service penetrations. Expands under heat to help block fire and smoke spread. Suitable for…
  • Thermoproof Exterior Fluid

    Thermoproof Exterior Fluid

    Deep penetrating fire retardant fluid for exterior bare timber. Suitable for cladding, fencing, decking and sleepers. Allows timber to retain a natural…
  • Thermoproof Interior Fluid

    Thermoproof Interior Fluid

    Clear penetrating fire retardant fluid for porous internal timber and softwood. Helps preserve the natural appearance of wood without heavy surface coatings.…
  • Basecoat
    Timbercoat Intumescent 30/60 Basecoat

    Timbercoat Intumescent 30/60 Basecoat

    Intumescent basecoat for timber fire protection systems achieving 30 or 60 minute resistance. Suitable for wood, plywood, MDF and wood-derivative boards. Expands…
  • Timber Basecoat
    Timbercoat Intumescent Basecoat

    Timbercoat Intumescent Basecoat

    Thermoguard Timbercoat Insulating Basecoat is an intumescent coating for timber and timber-derivative surfaces. It is used where you need to control surface…
  • Walls Basecoat
    Wallcoat 30/60 Minute Basecoat

    Wallcoat 30/60 Minute Basecoat

    Intumescent wall and ceiling basecoat for 30 or 60 minute fire protection systems. Suitable for plasterboard and cement board surfaces. Expands during…
  • Walls Basecoat
    Wallcoat Insulating Basecoat

    Wallcoat Insulating Basecoat

    Intumescent insulating basecoat for painted and multi-layer painted walls & ceilings. Designed to upgrade older painted surfaces to modern fire performance standards.…