SAFEWALLS ANTI-VIRAL SMOKE & FLAME RETARDANT MATT & SATIN
Decorative finish applied over Safewalls Insulating Basecoat
Safewalls system protects bare and painted walls from low risk Class 1 , moderate Class 2 risk
to high risk Class 4 multi-layer painted walls and ceilings with any number, type or
combination of types of paint to BS EN Class B s1 dO – the safest standards for toxic smoke
s1 flaming droplets dO and flamespread / insulation Class A2 + B .
Compliant to old Class O These results achieved at UKAS approved Fire Test Laboratory over
10, 14 and 20 coats of paint applied over several years to demonstrate real world protection.
91.5% Coronavirus reduction in 2 hrs – Anti-Viral 1 Log compliant for coated surfaces
99.9% bacteria reduction in 24 hrs. Anti-Bacterial 1 Log Compliant coated surfaces
Colour range – NCS, RAL, BS4800, BS381 and Thermoguard Select
Can be used externally in 2 coats without the insulating basecoat for Class s1 smoke
Can be used as part of a system to achieve 30 or 60 minute Fire Resistance.
Finished system provides a decorators’ acrylic-smooth aesthetically pleasing, durable
microbial resistant fire protection finishes to internal walls and ceilings
How it works:
Safewalls Insulating basecoat expands in a fire to create a resilient insulating barrier.
Safewalls Anti-Viral Smoke and Flame Retardant emits a safe fire
damping vapour in a fire to control flame spread and suppress smoke.
safewalls SFR’s polyurethane hardened acrylic “cross-links” during the drying process to form
a smoother, harder, more cleanable surface than typical wall paints and help eliminate the
microscopic pockets that host bacteria which prevent effective cleaning.
A unique concentrated mix of safe, biocidal metal encapsulated nano-particles attacks
viruses and bacteria that settle on surfaces, damaging their protective “envelope” to kill their
live cores and disable their spikes penetration of lung’s cells
FIRE TEST STANDARDS in UKAS and EOTA – accredited Fire Test laboratory
BS EN Class B s1 d0 (old Class 0 compliant) over 10, 14 and 20 coats of all wall paint types used
on buildings since Vinyl, acrylic, oil based, anti-graffiti, with or without wallpaper and the
flame retardant paint that emits toxic antimony gas.
Surfaces coated with Safewood are designated Anti-Viral in just 2 hrs
91.5% “1 Log” Coronavirus reduction in 2hrs to approved test ISO 21702
99.9% “1 Log” bacteria reduction in 24hours to approved test ISO 22196
In approved UK Microbiology Laboratories.
Sold in 25 sqm and 50 sqm pack sizes to aid correct application
Follow on can guide to coverage to enable project Certification.
In normal conditions product will be touch dry in an hour and fully dry after 4 hours
Do not apply in temperatures under 8°C or above 30°C.
Maximum relative Humidity below 75%.
Surface should be at least 3°C above the dew point.
This product forms part of a system for protecting wood and wood-based boards
VOC Content Composition
Low VOC EU limit for this product (cat A/i) is 140 g/l. This product contains 16 g/lv
Catalytic and safe vapour-emission compounds, nano-particle encapsulation- enhanced
biocidal metals, water-based polyurethane hardened cross-linking acrylic
Safewalls Insulating Basecoat must be clean and fully hard dry. Stir well before use
Over Safewalls Insulating Basecoat
Apply 1 good Safewalls Anti-Viral Smoke & Flame Retardant
Brush Or Roller
Use woven short pile roller sleeve or synthetic brush
Best wall paint method is to first lay paint across an area, then promptly roll vertically
Pressure Pot and Gun conventional with hand-portable compressor.
Thin 5% water
OR Airless Graco 1500, 3500 or equivalent. 3/8” line, 30 mesh filter on machine, no
filter in gun. 521, 523, 621 or 623 tip
Ensure coverage is applied as per can i.e., 20 sqm can covers 20 sqm.